赢|qy88vip

                          RAPIDMIXPortable 3 Bin Cold Feed System

                          SPECS:
                          Large 14' x 9'-6" Hopper bins
                          30" wide 5 HP feeder conveyor
                          36" wide 10 HP collecting conveyor
                          Portable chassis and hopper support structure of heavy duty W-flange beam

                          SET-UP FOOTPRINT:
                          10' wide
                          59'-6" long
                          14' height
                          height of collection conveyor clearance, once set up is: 5'5"

                          LOGISTICS INFO:
                          Width: 10'
                          King pin to rear axle is: 44'-6"
                          Entire length is: 57’-6"
                          Weight-Unknown

                          Each hopper is 9’-6” wide x 14’ long with 20 tons storage capacity constructed from 1/4” thick
                          steel plate with rectangle tube reinforcing at the hopper top and angle iron reinforcing at the
                          hopper mid-section and bottom section; self-relieving tapered hopper bottom opening to
                          minimize bridging; full length skirt boards with Rema Skirt 50 adjustable rubber flashing to
                          prevent leakage between hopper bottom and belt feeder; adjustable discharge gate with hand
                          crank to control material flow from each hopper.

                          Each belt feeder is 30” wide x 8’ long with fixed speed 5 h.p. electric motor, Dodge TXT425 shaft
                          mount speed reducer, v-belt drive and OSHA drive guard; Dodge 12” diameter rubber lagged
                          head pulley mounted on Dodge 2-7/16” SCM pillow block bearings; Dodge 12” diameter self-
                          cleaning tail pulley mounted on Dodge 1-15/16” SCM pillow block bearings; screw take-up
                          assemblies; OSHA tail terminal guard and side nip guards; ICC CEMA “C” flat belt idlers with 5”
                          diameter rolls mounted on close centers; 3 ply vulcanized endless conveyor belting. Belt speed
                          setup for 90 fpm.

                          Collecting conveyor is 36” wide with fixed speed 10 h.p. electric motor, Dodge TXT315 shaft
                          mount speed reducer, v-belt drive and OSHA drive guard; Dodge 12” diameter rubber lagged
                          head pulley mounted on Dodge 2-3/16” SCM pillow block bearings; Dodge 12” diameter self-
                          cleaning tail pulley mounted on Dodge 1-15/16” pillow block bearings; screw take-up
                          assemblies; OSHA tail terminal guard; head pulley nip guards; ICC CEMA “C” 35 degree troughing
                          idlers with 5” diameter rolls; ICC CEMA “C” return idlers with 5” diameter rolls; 2 ply conveyor
                          belting with 3/16” x 1/16” rubber covers; Flexco 140 mechanical belt splice; 9’-6” long conveyor
                          extension beyond the hoppers which folds for transport.

                          Portable trailer constructed of heavy duty wide flange beams which are braced for optimum
                          rigidity; wide flange vertical beams and angle iron cross members tie all hoppers and trailer
                          together; single axle chassis with dual 11 x 22.5 tires, air brakes, king pin, rear lighting, mud flaps
                          and blocking pads.

                          One rust inhibitor prime coat and one finish coat gray paint for all equipment; one finish coat
                          safety yellow paint for all guarding.

                          Electric motor control panel with main disconnect, AC Tech SMV variable speed drives for the
                          belt feeders, branch circuit protection, fixed speed starter for the collecting conveyor, all
                          mounted on a skid support structure bolted to the trailer frame and wired into the electric
                          motors.

                          CALIBRATION - The discharge gates can be adjusted to control the depth of bed of material coming out of the
                          hopper and the variable speed drives change the belt speed of each belt feeder.

                          Head terminal includes Weg 15 h.p. TEFC electric motor; Dodge TXT4 shaft mount speed reducer
                          with internal backstop; v-belt drive and OSHA approved drive guard; Dodge 14" diameter rubber
                          lagged head pulley mounted on 2-7/16" diameter 1045TGP shafting with Dodge SCM pillow
                          block bearings; head pulley nip guards.

                          Tail terminal includes Dodge 12" diameter self-cleaning tail pulley mounted on 2-3/16" diameter
                          1045TGP shafting with Dodge SCM pillow block bearings; screw take-up assemblies; OSHA
                          approved tail terminal guard.

                          Standard 5' long receiving hopper with skirt boards, rubber flashing and bolt-on wing
                          attachments.

                          Conveyor frame constructed of 8" channel iron with 2" square tube reinforcement making a
                          rigid framework which is easily stacked for hauling.

                          Conveyor belting, 2 ply, with 3/16" top rubber cover and 1/16" bottom rubber cover; Flexco 140
                          mechanical belt splice.? 36”

                          CEMA "C" conveyor troughing idlers 35 degree deep with 5" diameter rolls mounted on 4'
                          centers; CEMA "C" troughing idlers 20 degree deep with 5" diameter rolls mounted on close
                          centers at the load point; CEMA "C" return idlers with 5" diameter rolls mounted on 10' centers.

                          Adjustable height V-style support legs for stockpiling.

                          SOLD AS-IS WHERE-IS WITH NO IMPLIED WARRANTY.

                          Production range150 Tons Per Hour
                          Price from$170,000.00

                          Product Images

                          Get a quote

                          Thank you for your interest in the equipment and services of DHE Inc. Let our staff know exactly what your needs are, and we will be happy to contact you with a quote to discuss how we can best meet your project specifications.?

                          Fullname
                          Email
                          Phone
                          Company
                          Location
                          Message
                          Captcha

                                                  image

                                                  car

                                                  Buddhism

                                                  Celebrity

                                                  Mobile Games

                                                  mailbox

                                                  car

                                                  mailbox

                                                  video